Mills
Fritsch Milling And Sizing Inc Sieve Ring P-14 Cl Stainl. Steel 0.2 mm Trapezoidal Perf.
Sieve ring P-14 cl stainl. steel 0.2 mm trapezoidal perf.
Sieve rings determine the final fineness of the sample.
Sieve rings with trapezoidal and round perforations are available.
Sieve rings with trapezoidal perforations improve size reduction through extra shearing action.
Sieve rings with round perforation are recommended for reduction of brittle materials and medium fine materials with a small grain band.
Sieve rings for reinforced edges for heavy duty size reduction are also offered.
Grainger Thread Mill Carbide
The Micro 100 16R773 is a 1/4" diameter, 4 flute, carbide thread mill with a TiAlN coating. It has a right hand spiral flute design and can cut 60 degree internal threads in steel, stainless steel, cast iron, aluminum, and other materials. The thread mill has a shank diameter of 3/8" and an overall length of 2-1/2". It is capable of cutting unified thread sizes from 4-56 to 1/4-20 as well as metric thread sizes from M3 to M6. The thread mill should be run at speeds from 200 to 600 SFM depending on the material being threaded. Proper coolant should be used when operating this carbide thread mill for optimal tool life and performance.
Brainxell Inc BrainFast SK Supplement (100uL)
Added to neuronal and astrocyte media during seeding to increase the purity of the culture (100uL)
Fritsch Milling And Sizing Inc Mounting Rack Cpl. for P-1/ P-13 Classic Line
For fine pre-crushing of sample material with a feed size of 95 mm down to 0.1 mm final fineness in a single process and for continuous operation with the Jaw Crushers PULVERISETTE 1 classic line
Fine pre-crushing from 95 mm down to 0.1 mm in a single process
A mounting rack with chute in combination with the Jaw Crusher PULVERISETTE 1 (Model I + II) classic line and the Disk Mill PULVERISETTE 13 classic line make it possible to grind 95 mm feed material down to a final material fineness of 100 µm in a single process. Continuous comminution is also possible.
Continuous operation
With the operation of the mounting rack and delivery chute, the jaw crushers PULVERISETTE 1 (Model I + II) classic line can be used for continuous operation.
Grainger Thread Mill Carbide
The Thread Mill Carbide 16R762 is a solid carbide thread milling cutter manufactured by EFC. It has a 16 mm diameter, can machine a variety of thread sizes including M6, M8, M10, and M12, and features an AlTiN coating for increased tool life and performance. The cutter has 6 flutes and can machine threads in steel, stainless steel, cast iron, aluminum, and other materials. It has a right-hand cut direction. The 16R762 thread mill is well-suited for difficult to machine materials and for blind holes and cavities. It provides an efficient method of thread milling.
Grainger Sq. End Mill Single End Carb 0.0120
The Grainger Approved Square End Mill Single End is a high-speed steel end mill with a square end for milling slots, keyways, and pockets. It has a 1/2" shank diameter, a 1" cutting diameter, a 2" overall length, and 2 flutes. The end mill has a TiN coating for increased tool life and lubricity. It can machine steels, stainless steels, cast iron, aluminum, copper, brass, bronze, plastics, and other non-ferrous materials. This end mill is designed for use on CNC or manual milling machines.
Fritsch Milling And Sizing Inc Grinding Bowl 250 Ml Hardmetal Tungsten Carbide
Grinding bowl 250 ml hardmetal tungsten carbide with lid and seal ring
Grinding bowl volume: 250 ml
Useful capacity: 30 … 125 ml
Weight net: 5.000 kg
General material specification:
Material: hardmetal tungsten carbide - WC
Abrasion resistance: very good
Suitable for: hard, abrasive samples
Fritsch Milling And Sizing Inc Pin Mill Conversion Kit Cpl. Pin Insert, P-14 Classic Line
Pin mill conversion kit cpl. pin insert, PULVERISETTE 14 classic line
Consisting of pin rotor and grinding chamber lid with pin insert.
For grinding without a sieve for the most difficult, medium-hard, oil or grease containing materials such as waxes or paraffins.
To discharge and collect large quantities which need to be ground use the conversion kit for grinding large quantities.
RWD LIFE SCIENCE INC PRECISE IMPACTOR
68099Ⅱ, the new upgraded precise impactor is a very friendly tool for evaluate traumatic brain injury mechanisms in basic medical research. This system is a popular way to make a traumatic brain injury modeling, which is controlled by pneumatic and electric device, and increased accuracy and reproducibility in brain injury modeling. In addition, a unique sensor is used to automatically detect the zero-interface reference point at the impact point of the model accurately and reliably before the start of the impact procedure, thus reducing the tedious process of manual zeroing. In the experiment, the standard cylindrical head hammers with different size are available. The parameters such as impact depth, velocity and dwell time could be precisely controlled to ensure that the damage level to be accurate. It is an accurate tool with high efficiency, repeatability and stability, ensuring the reproducibility of the damage model
Grainger Thread Mill 1/4 3/8 -18 Carbide
The Micro 100 16R671 is a 1/4" diameter carbide thread mill with a 60 degree thread angle. It has 4 flutes and can cut right hand threads from 4 to 56 threads per inch. The overall length is 3" and it has a 1/2" shank. This thread mill is made of solid carbide for wear resistance when cutting steel, stainless steel, cast iron, aluminum, and other materials. It can be run at speeds up to 2000 SFM.
Fritsch Milling And Sizing Inc Mortar P-0 Hardmetal Tungsten Carbide
General material specification:
Material: hardmetal tungsten carbide - WC - GC10
Abrasion resistance: very good
Suitable for: hard, abrasive samples, very suitable for cryogenic grinding
Fritsch Milling And Sizing Inc Grinding Ball 50 mm Hardened Steel, P-0
General material specification:
Material: hardened steel
Abrasion resistance: good
Suitable for: medium-hard, brittle samples
Fritsch Milling And Sizing Inc Fixed Jaw P-1 Cl Size 1 Stainless Steel
Fixed crushing jaw, stainless steel for PULVERISETTE 1 classic line, Size 1 for the comminution of medium-hard, brittle samples
General material specifications:
Material: stainless steel - 1.4571
Abrasion resistance: fairly good
Suitable for: medium-hard, brittle samples