Slide Mounting Media
Electron Microscopy Sciences In-Situ Mount 30 ML
In-Situ mounting medium is a unique mounting medium designed for permanent preservation of tissue sections and cell smear with alkaline phosphatase chromogens like NBT/BCIP and red stain. Use for mounting tissues and cell smears.
Electron Microscopy Sciences EMS Conductive Gold-Paste Extender 25 ML
Extender for conductive gold paste adhesive used in scanning electron microscopy.
Electron Microscopy Sciences EMS CitraMount Mountant 100 ML
This butyl acetate and acrylic resin mixture is the first mounting medium developed for coverslipping directly from d-limonene based clearants. Superior results are also with xylene. CitraMount medium is recommended for manual coversliping only as it may cause damage to the valves of automated coverslippers. Clear seal has a drying time of less than 24 hours. Refractive index is 1.42 and Viscosity is 90 cP.
Electron Microscopy Sciences Fluoro-Gel II Mounting Medium 30 ML
Fluoro-Gel is a water based mounting medium designed for the permanent mounting of fluorescent stained tissues, which may either be damaged or soluble in organic solvents, such as xylene or toluene. This unique formula prevents rapid photo-bleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa Fluoro 488, Alexa Fluoro 594, Green Fluorescent Protein (GFP), Tetramethylyrhodamine, Redox, Phycoerythrin (RP-E), Phyocyanin (PC), and Allophycocyanin (APC).
The fluorescence is retained during prolonged storage at 4 degree C in the dark. Application: Immunofluorescence, confocal microscope. Contains DAPI (4, 6-diamino-2-phenylindole), a counter stain for DNA.
Electron Microscopy Sciences CytoSeal 60, 4 oz
Premium quality; formulated from the highest quality advanced acrylic resin. It will not become brittle and crack, nor will it discolor or yellow with age. CytoSeal dries rapidly, allowing examination soon after application. It can be used with oil immersion objectives and in fluorescent procedures. Slides will not stick together and the medium will not "cold flow" to the edge of the slide during long term storage. CytoSeal can be dissolved in toluene or xylene. An antioxidant has been added to the formulation to prevent fading of slides. CytoSeal comes in a Controlled Drop Dispenser, with varying viscosities. CytoSeal 60, which has a viscosity of 60cps, is intended primarily for use with cover glass.
Electron Microscopy Sciences CytoSeal™ Mounting Medium 280 Mounting Medium 4 OZ
CytoSeal 60 and 280 are toluene-based mounting mediumformulated from acrylic resins that will not crack or discolor with age. An antioxidant has been added to the formulation to inhibit fading or yellowing of stained specimens. It will not become brittle and crack, nor will it discolor or yellow with age. CytoSeal can be dissolved in toluene or xylene. High-viscosity medium for applications where minimal spreading is desired or applications without a cover glass
Electron Microscopy Sciences Permount™ Mounting Medium 500 ML
Permount is a toluene-based synthetic resin mounting medium that is ideal for rapid mounting and long term storage of slides. Its low viscosity allows for a thinner mounting layer offering better optical quality and bubble-free preparations. It has a refractive index near that of a fixed protein which helps to keep images free of distortion. Use for mounting coverslips to slides with thick or thin specimens. Permount preserves most biological stains with little or no fading when the slides are stored in darkness. It contains an anti-oxidant to prevent the formation of annular rings and its high softening point (155 degree C/311 degree F) makes it suitable for microprojection.
Electron Microscopy Sciences Permount™ Mounting Medium 100 ML
Permount is a toluene-based synthetic resin mounting medium that is ideal for rapid mounting and long term storage of slides. Its low viscosity allows for a thinner mounting layer offering better optical quality and bubble-free preparations. It has a refractive index near that of a fixed protein which helps to keep images free of distortion. Use for mounting coverslips to slides with thick or thin specimens. Permount preserves most biological stains with little or no fading when the slides are stored in darkness. It contains an anti-oxidant to prevent the formation of annular rings and its high softening point (155 degree C/311 degree F) makes it suitable for microprojection.
Vector Laboratories VECTASHIELD Antifade Mounting Medium 10 ml
VECTASHIELD Antifade Mounting Medium prevents rapid photobleaching of fluorescent proteins and dyes. It does not solidify, but remains a semi-liquid on the slide and can be stored without sealing. If desired, coverslips can be sealed around the perimeter with nail polish or a plastic sealant. Mounted slides should be stored at 4 degrees C, protected from light. VECTASHIELD Mounting Medium is compatible with a wide array of fluorochromes, enzymatic substrates, and fluorescent proteins, including many of the fluorophores used in super resolution methods like STORM, STED, and 3D-SIMM imaging, extending their lifetime and enhancing their photo-switching characteristics. (Olivier, N. et al., 2013, Biomedical Optics Express, Vol. 4 No. 6, pp. 885-899). The refractive index is 1.45. Ships at Ambient Temperature and Once received the storage temperature is 2-8 °C.
Electron Microscopy Sciences EMS Shield Mount with Dabco 100 ML
EMS Shield Mount is an aqueous non-permanent, low viscosity mounting medium for immunofluorescence. This unique formula prevents rapid photobleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa fluoro 488, Alexa fluoro 594, Green fluorescent protein (GFP), tetramethyly rhodamine and Redox. The fluorescence is retained during storage at 4 degree C in the dark. This medium does not contain phenylenediamine, which destroys immunofluorescence of Cy dyes.
Application: Use for immunofluorescence and confocal microscopy.
Reagent: Ready to use mounting medium for Immunofluorescence.
Biotium EverBrite Mounting Medium, w/o DAPI, 10 mL
A revolutionary antifade mounting medium optimally formulated for preserving fluorescence of our CF dyes and other fluorochromes.
Fisher Healthcare™ PROTOCOL™ Histobond Adhesive
Resin that enhances adhesion of specimens to slides prior to hydrating and staining
Fisherbrand™ Super Friendly Freeze'It™
Aerosol for cooling liquid, semisolid, and solid samples.