Tissue Grinders
Research Products International Corp Conical Shaped Tissue Grinder, 6 per Bag
Conical-shaped tissue grinder has cone that tapers from 8.2mm to 2.9mm with a rounded tip. Overall length is 21cm. Steam autoclavable to 250°F (121°C). Packaged 6 per case.
Ace Glass, Inc. 50ML TUBE ONLY 50ML TUBE ONLY
50mL glass tapered tube with a pouring lip, for use with a glass pestle (50974573) as a tissue grinder. The conical area of the tube is for initial grinding, and the cylindrical area is for final homogenization. Interchangeably ground to 0.1-0.15mm clearance. Capacity represents volume with pestle inserted.
Active Motif Dounce Homogenizer
Whether you are analyzing cell lysates by Western blot, or preparing chromatin for a chromatin immunoprecipitation (ChIP) experiment, the ability to obtain reliable results depends on accurate cell lysis. Active Motif's dounce homogenizer is ideal for preparation of cell lysates or chromatin, particularly if the cell and tissue samples seem to be resistant to lysis under normal detergent conditions. The dounce is available in two sizes for both small and large sample preparations. Each dounce is supplied with two pestles of different widths. One pestle fits tightly within the shaft of the dounce for maximum friction and cell disruption, while the other pestle has a looser fit and is ideal for generating a homogenous sample. Since the dounce homogenizer is made of glass it can easily be cleaned and sterilized between uses.
Chemglass Life Sciences Tissue Grinder, 5mL, Tenbroeck, 10mm Dia Pestle, 65mm Chamber Lgth, #000 Rubber Stopper
Tissue Grinder, 5mL, Tenbroeck, 10mm Dia Pestle, 65mm Chamber Lgth, #000 Rubber Stopper. Are of the same design as the Potter Elvehjem style, but the pestle is hollow allowing the addition of ice water to keep samples chilled during the grinding process.
Chemglass Life Sciences Tissue Grinder, 5mL, Potter-Elvehjem, 10mm Dia Pestle, 65mm Chamber Lgth
Tissue Grinder, 5mL, Potter-Elvehjem, 10mm Dia Pestle, 65mm Chamber Lgth. Potter-Elvehjem style tissue grinder with a Stainless Steel /PTFE pestle and an un-ground mortar. The pestle's Stainless Steel rod is for use with an overhead stirrer but the accessory "T" handle can be easily attached to assist with manual grinding. Radial serrations in the lower portion of the pestle facilitate the delivery of homogenate into the cylindrical portion of the mortar.
Chemglass Life Sciences Tissue Grinder, 55mL, Potter-Elvehjem, All Glass, 25mm Dia Pestle, 125mm Chember Lgth
Tissue Grinder, 55mL, Potter-Elvehjem, All Glass, 25mm Dia Pestle, 125mm Chember Lgth. The rounded shape on the lower portion of the pestle progressively grinds the sample and the homogenate is produced as the sample is forced through the cylindrical section. Generally used with soft tissue such as brain and liver samples.
Chemglass Life Sciences Tissue Grinder, 5mL, Griffiths, All Glass, 12mm Dia Pestle, 80mm Chamber Lgth, 150mm OAL
Tissue Grinder, 5mL, Griffiths, All Glass, 12mm Dia Pestle, 80mm Chamber Lgth, 150mm OAL. The 5mL size is for grinding emulsions and tissues. The ground half round sphere ensure perfect grinding.
Bellco Glass, Inc. Tenbroeck Homogenizer, 15 mL Glass
Hollow glass pestle allows addition of ice water for chilling samples during homogenization. All glass construction primarily for manual operation. Interior of the pestle is hollow allowing to reduce heat generated in the grinding process. It can be used with a laboratory stirrer at low speed if a rubber stopper is inserted in the top of the pestle. A short steel rod (not supplied) completes the connection to the collet or Jacobs chuck. CLEARANCE BETWEEN PESTLES & TUBES IS: .004"-.006". CAPACITY: 15ml. STOPPER SIZE: #1.
Ace Glass, Inc. 15mL tissue grinder consists of all-glass pestle and tapered tube
15mL tissue grinder consists of all-glass pestle and tapered tube. The conical area is for initial grinding, and the cylindrical area is for final homogenization. Interchangeably ground to 0.1 - 0.15mm clearance. The 10mm pestle rod can be used with a 509558293 Flex-Grip Chuck. Capacity represents volume with pestle inserted.
Bellco Glass, Inc. Tenbroeck Homogenizer, 2mL Glass
Hollow glass pestle allows addition of ice water for chilling samples during homogenization. All glass construction primarily for manual operation. Interior of the pestle is hollow allowing to reduce heat generated in the grinding process. It can be used with a laboratory stirrer at low speed if a rubber stopper is inserted in the top of the pestle. A short steel rod (not supplied) completes the connection to the collet or Jacobs chuck. TOOLED PESTLE FOR USE WITH RUBBER STOPPER (NOT SUPPLIED). CLEARANCE BETWEEN PESTLES & TUBES IS; .004" TO .006".
Chemglass Life Sciences Tissue Grinder, Dounce, 7mL Working Capacity, 13mm Dia Pestle, 82mm Chamber Lgth
Tissue Grinder, Dounce, 7mL Working Capacity, 13mm Dia Pestle, 82mm Chamber Lgth. The Dounce tissue grinder is used by moving the pestle up and down and is designed for studies where the nucleus has to remain intact Supplied with two pestles that are used in the same tube, the large clearance pestle is for the initial sample reduction while the small clearance pestle is used to form the final homogenate.