Chromatography Autosampler Vial Caps
Microsolv Technology Corporation Caps Snap Top Green Sil/Ptfec
Caps, Snap Top, with Silicone Rubber / PTFE Septa, fitted in smooth, polyethylene, Green Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. MicroSolv Brand. 100/PK.
Sigma Aldrich Fine Chemicals Biosciences SR 12813 >=98%, solid | 126411-39-0 | MFCD00888473 | 5MG
SR 12813 >=98%, solid | Purity: >=98% | Mol Wt: 504.53 | 126411-39-0 | MFCD00888473 | 5MG
Microsolv Technology Corporation Caps, Snap Top, with Silicone Rubber / PTFE Pre-Slit Septa, fitted in smooth, polyethylene, Red Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 1000/CS.
This is one of the snap caps on the market and has been available for over 25 years. Pre-Slit septa are normally recommended for Waters Alliance instruments.
Microsolv Technology Corporation Caps, Screw Top, with Tan Silicone Rubber / White PTFE Septa, bonded in "knurled", polypropylene, Blue Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 1000/CS.
Ultra-pure Septa and is a good choice for LCMS, GCMS & LCMS/MS. This cap is also recommended for Waters Acquity™ autosamplers.
Microsolv Technology Corporation Caps, Snap Top, with Soft-Guard, White Silicone Rubber / Red PTFE Septa, fitted in smooth, polyethylene, Natural Transparent Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
Soft-Guard™ Septa provide easier penetration of autosampler needles and better resealing than other brands, for longer instrument up-time and fewer missed injections.
Microsolv Technology Corporation Caps, Snap Top, with Soft-Guard, White Silicone Rubber / Red PTFE Septa, fitted in smooth, polyethylene, Red Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
Soft-Guard™ Septa provide easier penetration of autosampler needles and better resealing than other brands, for longer instrument up-time and fewer missed injections.
Microsolv Technology Corporation Caps, Snap Top, with 0.04" thick, White Silicone Rubber / Natural PTFE Septa, fitted in smooth, polyethylene, Red Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
Natural PTFE is very pure and does not have dyes that could extract from it. Our most economical Silicone Rubber / PTFE Snap Cap.
Microsolv Technology Corporation Caps, Snap Top, with 0.04" thick, White Silicone Rubber / Natural PTFE Septa, fitted in smooth, polyethylene, Yellow Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 1000/CS.
Natural PTFE is very pure and does not have dyes that could extract from it.Our most economical Silicone Rubber / PTFE Snap Cap.
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE Pre-Slit Septa, fitted in "knurled", polypropylene, Black Caps. For use with 13-425mm thread, 15x45mm autosampler vials. 100/PK.
Economical Pre-Slit Cap for easy penetration by autosampler needles. Recommended for older Waters instruments. Use with 15x45mm, 4ml vials.
Microsolv Technology Corporation Cap Crimp Top Magnetic Goldca
Caps, Crimp Top, with 1.0mm thick, Red PTFE / White Silicone Rubber / Red PTFE Septa, fitted in steel, magnetic Gold Caps. For use with 11mm Crimp or Snap Top, 12x32mm autosampler vials. MicroSolv Brand. 100/PK.
Microsolv Technology Corporation Caps, Snap Top, with Red PTFE / White Silicone Rubber / Red PTFE Septa, fitted in smooth, polyethylene, Blue Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 1000/CS.
This septa was designed for specific, older instruments such as Agilent 1050 and to provide extra cleaning when "wiping" a needle. Also provides a small degree of better resealing after injection compared to Silicone Rubber / PTFE Septa. Buying in case quantities can save money and time.
Microsolv Technology Corporation Caps Snap Top Blue White Ptfe
Caps, Snap Top, with White PTFE Septa, fitted in smooth, polyethylene, Blue Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. MicroSolv Brand. 100/PK.
Microsolv Technology Corporation Caps, Screw Top, Solid, with Red-Orange Natural Rubber / Transparent TFE Liner, fitted in knurled polypropylene, White Caps. For use with ND20 thread, storage Vials or Bottles. 100/PK.
Natural Rubber / TFE Liner is 60⁰ Shore A (hardness) and is 1.3mm thick. Cap can be used for use with Storage Vials or Bottles with 20-400mm screw threads. Use with Storage Vials.
Microsolv Technology Corporation Cap Hs Crimp Safety Dark Grey
Caps, Headspace, Crimp Top, with Dark Grey Butyl Rubber Septa, fitted in Aluminum, Silver Pressure Relief Caps with 10mm center holes. For use with 20mm Crimp Top Headspace Vials. MicroSolv Brand. 100/PK.