General HPLC Accessories
Waters Corp CORTECS UPLC C18+ Method Validation Kit, 1.6 μm, 90 Å, 2.1 × 75 mm, 3/pk
The CORTECS UPLC C18+ Method Validation Kit ensures method reproducibility and robustness. It provides three columns from different batches, allowing comprehensive consistency evaluation. This kit utilizes 1.6 μm solid-core particle technology for high efficiency, sharper peaks, and enhanced resolution, speed, and sensitivity.
- Includes three columns from three batches for method evaluation.
- Ensures batch-to-batch and column-to-column reproducibility.
- Utilizes 1.6 μm solid-core particle technology for high efficiency.
- Provides sharper, narrower peaks for increased resolution, speed, and sensitivity.
Waters Corp CORTECS Phenyl Method Validation Kit, 90Å, 2.7μm, 3.0 x 150 mm
This Method Validation Kit features CORTECS Phenyl phase material with a particle size of 2.7 μm and a pore size of 90 Å. The columns have an inner diameter of 3.0 mm and a length of 150 mm, making them suitable for method validation applications.
- Columns have an inner diameter of 3.0 mm.
- Column length is 150 mm.
- Features a particle size of 2.7 μm.
- Pore size is 90 Å.
- Utilizes CORTECS Phenyl phase material.
- Designed for method validation.
- Conforms to USP L11.
Waters Corp Waters Nano-Tee, .006 in. Thru, UPLC, nanoACQUITY System
This nano-tee assembly is designed for use with the nanoACQUITY UPLC system. It features a .006 in. thru-bore and is compatible with various fluidic configurations, providing essential connectivity for high-performance liquid chromatography applications.
- Designed for 10,000 psi high-performance liquid chromatography systems
- Compatible with 2D with dilution fluidic configuration
- Compatible with direct injection fluidic configuration
- Compatible with single pump fluidic configuration
- Compatible with vented dual pump trapping fluidic configuration
- Functions as an essential fitting for system components
Waters Corp Performance Maintenance Kit, ACQUITY Arc Sample Manager-FTN, Annual, 1 pk
The Performance Maintenance Kit for the ACQUITY Arc Sample Manager-Flow Through Needle contains all the quality parts necessary to keep your instrument operating at peak performance on an annual basis.
- Syringe
- Standard needle
- Needle seat
- Injection cartridge
- Filters
Waters Corp CORTECS Method Validation Kit, Phenyl, 90Å, 2.7 μm, 4.6 mm x 30 mm
These method validation kits include CORTECS Phenyl columns from three different batches, offering complementary selectivity to C18 stationary phases with high efficiency and reduced backpressure.
- Chemistry: Phenyl
- Separation mode: Reversed phase
- Particle substrate: Silica
- pH range: 2 to 8 pH
- Maximum pressure: 18000 psi (1240 Bar)
- Endcapped: Yes
- Bonding technology: Phenyl-Hexyl
- Silanol activity: Low
- Particle shape: Spherical
- Particle size: 2.7 μm
- Endfitting type: Parker-style
- Pore size: 90 Å
- Format: Method validation kit
- Surface area: 100
- System: UPLC, UHPLC
- Particle technology: Solid core
- USP classification: L11
- Inner diameter: 4.6 mm
- Length: 30 mm
- Carbon load: 5.9 %
- Units per package: 3 pk
Waters Corp CORTECS UPLC Column Method Validation Kit, HILIC, 2.7 μm, 3.0 × 50 mm
This CORTECS UPLC Column Method Validation Kit is designed for HILIC chemistry applications. It features a particle size of 2.7 μm and dimensions of 3.0 × 50 mm. Each kit is supplied with three columns, each from a different batch of material, to facilitate method validation.
- HILIC chemistry for polar compound analysis
- Particle size of 2.7 μm for efficient separations
- Dimensions of 3.0 × 50 mm
- Kit includes three columns
- Columns sourced from three different material batches for robust method validation
Waters Corporation Swing Clamp, NW40, Aluminum
The NW40 Swing Clamp is an aluminum clamp designed to secure hoses or lines to various lab equipment. It helps prevent messy wires from bunching up, reducing hazards in the lab. This clamp ensures the clean and easy transfer of data, information, and liquids by securing wires, hoses, and other materials to lab systems or other structures.
- Made from aluminum
- Secures hoses or lines to laboratory equipment
- Designed as a spare part for easy replacement
Waters Corp ESI Probe Service Kit 700005787
The ESI Probe Service Kit contains all the parts necessary to service the probe.
Waters Corp Kit, Open Architecture, CHC Stabilizer, Xevo TQ
Waters Kit, Open Architecture, CHC Stabilizer, Xevo TQ
Waters Corp Plunger Seal Kit, BGM, 4/pkg, for HPLC Systems
The BGM Plunger Seal kit contains four each of the following: high pressure flanged seal, low-pressure seal, and a floating flanged seal-wash seal. The high- and low-pressure seals prevent pressurized solvent from leaking past the sapphire plunger.
- Includes high pressure flanged seals
- Includes low-pressure seals
- Includes floating flanged seal-wash seals
- Prevents pressurized solvent from leaking past the sapphire plunger
- Suitable for pump head rebuilds
- Designed for HPLC and purification systems
- Compatible with auto purification instruments
- Recommended for replacement as required
- Component for the 2555 Quaternary Gradient Manager
Waters Corp CORTECS C8 Method Validation Kit, 150x3mm, 1.6 μm
This HPLC column is designed as a method validation kit. It features a length of 150 mm, an inner diameter of 3 mm, and a particle size of 1.6 μm, making it suitable for a range of chromatographic separations.
- Length of 150 mm
- Inner diameter of 3 mm
- Particle size of 1.6 μm
- Pore size of 90 Å
- Includes 3 columns per pack
- pH range of 2 to 8
- Low silanol activity
- Surface area of 100 m2/g
- Endcapped
- Spherical particle shape
- 4.5% carbon load
Waters Corp CORTECS C18+ Method Validation Kit, 90à , 2.7 µm, 2.1 mm X 100 mm, 3/pk
CORTECS C18+ Method Validation Kit, 90à , 2.7 µm, 2.1 mm X 100 mm, 3/pk
Waters Corp CORTECS C8 Method Validation Kit, 90à , 2.7 µm, 2.1 mm X 150 mm, 3/pk
CORTECS C8 Method Validation Kit, 90à , 2.7 µm, 2.1 mm X 150 mm, 3/pk
Waters Corp CORTECS C8 Method Validation Kit, 1.6 μm, 3x50 mm
CORTECS C8 method validation kits provide columns of three different batches. CORTECS C8 columns are used for general purpose method development under low pH test conditions. The C8 ligand is preferred for some assays because it is less hydrophobic and therefore less retentive compared to C18 phases.
- C8 chemistry.
- Reversed phase separation.
- Silica particle substrate.
- pH range of 2 to 8.
- Max pressure: 18000 psi (1240 bar).
- Endcapped.
- Spherical particle shape.
- Particle size: 1.6 μm.
- Parker-style endfitting.
- Pore size: 90 Å.
- Method validation kit format.
- UPLC, UHPLC system compatible.
- Solid Core particle technology.
- USP classification L7.
- Dimensions: 3 mm x 50 mm.
- Carbon load: 4.5%.
- eCord included.
- 3 units per package.
Waters Corp CORTECS C8 Method Validation Kit, 90Å, 2.7μm, 2.1 mm × 100 mm
Waters CORTECS C8 Method Validation Kit, 90Å, 2.7μm, 2.1 mm × 100 mm