Bioprocess System Accessories
Chemglass Life Sciences Fixed Height Sample Tube for 15L BioReactors, M10 Thread, Max Immersion Length: 400mm
Fixed Height Sample Tube for 15L BioReactors, M10 Thread, Max Immersion Length: 400mm. Fixed height sampling tubes for bioreactors. Tubing is 1/4 inch OD.Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors.Applikon is a registered trademark of Applikon Biotechnology, Inc. Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
Chemglass Life Sciences Chemglass 50 L Squatty Jacketed Glass Process Reactor System, 400 mm Flange, Electric Motor (CG-1968-MB651M)
A 50 L squat, jacketed, cylindrical glass reactor system designed for pilot-scale processing. The low-profile vessel and integrated brushless DC overhead drive provide controlled mixing and efficient heat transfer, while the heavy-duty support frame and casters enable mobility and easy access for cleaning and draining.
- 50 L jacketed squat cylindrical glass vessel
- 400 mm flat top flange for large access and connections
- Brushless DC overhead stirrer with variable speed (~30-500 rpm)
- Heavy-duty stainless steel support frame with mobile swivel casters
- Maximized clearance below the drain valve for easy draining
- Jacketed design for temperature control and heat transfer
Bellco Glass, Inc. Bellco Heating Blanket,115V-15L-LW 325 Watts - Low Watt
Heating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. MADE IN THE USA. Male IEC connector for use with temperature controllersHeating at 5 watts/sq.in.Flask size: 15lWatts: 325 - low wattageDimension (in.): 5 x 333 latches6ft cord (18-2) with cj14 plugCaution: vessel must be stirred when heating blanket is in operation
Bellco Glass, Inc. Stand w/6 Bolts,7L Bioreactor
Bioreactor Stand w/ 6 Bolts for 7L bioreactor. MADE IN THE USA
Ace Glass, Inc. Bottle, pressure, 950mL, 60psi, complete with #25 back-seal plug
950mL pressure bottle with #25 Ace-Thred, rated for 60psig at as much as 120C. Includes #25 back-seal plug.
Chemglass Life Sciences Headplate for 3L Bio Reactors, 18 Ports
This adapter can be used to add fluids or gases to the bio reactor.The portion of the adapter that is within the reactor has a short drip tip tube that can accept tubing to reach further into the listed capacity reactor.Stainless steel components manufactured from 316L with an electropolished surface finish of 20Ra or better.Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors.Applikon is a registered trademark of Applikon Biotechnology, Inc.Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
Chemglass Life Sciences Reaction Vessel Lid, 4-Nk, 50mL, Equivalent to Mettler Easymax Part # 51161032
Reaction Vessel Lid, 4-Nk, 50mL, Compatible with Mettler Systems. (1) 14/20 SN, (1) GL-14 SN, (1) 10/18 SN and (1) 10/10 SN; Equivalent to Mettler Part # 51161032
Chemglass Life Sciences Tripod Stand for 7L Unjacketed Bio Reactor Vessels
Tripod Stand for 7L Unjacketed Bio Reactor Vessels. Stand to hold unjacketed bio reaction vessels. Top, two-piece ring is made of anodized aluminum while the lower ring and legs are electropolished stainless steel. Stands come complete with silicone o-ring and six, knurled nuts to attach the headplate to the stand.Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors.Applikon is a registered trademark of Applikon Biotechnology, Inc. Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
Foxx Life Sciences EZBio MTO Single Use (SUT) Cap Assembly, 53B VersaCap, PP, AdvantaFlex Tubing, Vented w/ Diptube, Plug, for 2000mL (2L) Bottle, Foxx or Nalgene Bottles, Sterile, 20/CS
Made To Order MTO Sterile Single-Use Polypropylene Cap Assembly for 2000mL (2L) Bottles with Tubing and Vent Filters are perfect for fluid transfer and storage. This EZBio MTO Single Use VersaCap assembly features a 2-port 53B Cap with 1/8” ID (3.2mm) x ¼” OD (6.4mm) AdvantaFlex® TPE Tubing and diptube. This cap assembly features a hose barb plug that keeps the line closed until it is removed for use. Additionally, all cap assemblies include a 0.2µm Hydrophobic PTFE Vent Filter that allows for ventilation while preventing media from escaping in the event of a spill. All EZBio "MTO" Single Use Cap Assemblies also include a ratchet style pinch clamp that allows the user to control flow into their container or close off the line entirely. The EZBio "MTO" Cap Assembly is the perfect option to phase out costly stainless steel apparatuses that are expensive to clean and validate. USP Class VI components, Gamma Irradiated in USA.
Chemglass Life Sciences Reaction Vessel Lid, Short, 6-Nk, 250mL, Equivalent to Mettler Multimax Part # 51161188
Reaction Vessel Lid, Short, 6-Nk, 250mL, Compatible with Mettler Systems. Compatible with Mettler Systems: 14/20 CN, (1) 14/20 SN, (2) 19/22 SN and (2) GL-14 SN's; 98mm OD Flange with Notch; Equivalent to Mettler Part # 51161188
Bellco Glass, Inc. Bellco Heating Blanket,115V-36L 1200 Watts
Heating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. MADE IN THE USA. Male IEC connector for use with temperature controllersHeating at 5 watts/sq.in.Flask size: 36lWatts: 1200 **not for celltrol** use 600 watt blanket (1964-57365)Dimension (in.): 5 x 48 3/4"3 latches6ft cord (18-2) with cj14 plugCaution: vessel must be stirred when heating blanket is in operation
Chemglass Life Sciences 400mm Reaction Vessel Lid, 7-Neck, 45/50 CN, (5) 45/50 SNs, (1) 80mm O-ring Flange SN
Reaction Vessel Lid, 7-neck, 400mm. Seven-Neck lid for 400mm flanged vessel. Lid has 45/50 center neck, five 45/50 side necks and a 80mm angled flange for powder addition. PLEASE NOTE: 80MM LID, O-RING AND CLAMP MUST BE ORDERED SEPARATELY.
Ace Glass, Inc. Tube, pressure, 120mL, 150psi, 38.1mm OD, 17.8cm long, complete with #15 back-seal plug
100mL glass pressure tube with #15 Ace-Thred, rated at 150psig at as much as 120C. Includes #15 back-seal plug. Dimensions: 38.1mm O.D. x 17.8cm long.