Bioprocess System Accessories
Accuflow Systems Biosimplex Spinner Flask Closure Assembly 1l 2 Port 10/pk
Biosimplex Spinner Flask Closure Assembly 1l 2 Port 10/pk
Cowie Technology Corporation PTFE NPT FIT 1/2NPT W/14MM BOR
This item has a minimum qty of 5 per supplier requirements.
Bellco Glass, Inc. O-Ring Kit 7L
O-ring replacement kit. MADE IN THE USA. Size: 7l A523-234 is for 3/8" accessories A523-407 is for 1/4" accessories A542-522 is for 5/16"Thermowell A542-521 is for 3/4" accessories A542-523 is the inner o-ring for the probe holder 1964-88803 is A542-528.
Bellco Glass, Inc. Air Stone Sparger, 6,8 & 15L For MicroCarrier Spinner Flasks
Gently introduces bubbles into vessels. Includes 45mm polypropylene cap and white silicone gasket. MADE IN THE USA. 316l stainless steel 20 ra finish Size: 6-15l 12mm od coarse glass frit 0.2um Acrodisc filter w/ hose fitting
![eMolecules 2243590-42-1 | Ambeed | Benzo[12-b34-b56-b]trithiophene-258-tricarbaldehyde | 1g | 571784217 | A1195874 | 330.39 | C15H6O3S3](https://assets.fishersci.com/TFS-Assets/CCG/product-images/502470190.JPG-250.jpg)
eMolecules 2243590-42-1 | Ambeed | Benzo[12-b34-b56-b]trithiophene-258-tricarbaldehyde | 1g | 571784217 | A1195874 | 330.39 | C15H6O3S3
ChemScene | 14-Dibromoisoquinoline | 250mg | 569146851 | CS-0131946 | 51206-40-7 | MFCD00234475 | 286.954 | C9H5Br2N
If you are unable to find the chemical you are looking for, make sure you are logged into your fishersci.com account and click on the following link:
eMolecules Building Block Tool
Chemglass Life Sciences 5L ChemRxnHub Process System Complete with Glassware, Stand, OHS 100 Advance Motor and Manifold/Drain System
ChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy installation/removal of glassware and fits into most benchtop hoods.
Bellco Glass, Inc. Water Jacketed Bioreactor Vessel, 7L
Round bottom bioreactor vessel is manufactured of type 1 class a Borosilicate glass. Graduations are 500ml to 2500ml every 500ml. Vessel dimensions are 225mm OD x 375mm OAL. A full range of accessories are available for this vessel. 7L.. MADE IN THE USA
Bellco Glass, Inc. Bellco Heating Blanket,230V-8L 375 Watts
Heating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. MADE IN THE USA. Male IEC connector for use with temperature controllersHeating at 5 watts/sq.in.Flask size: 8lWatts: 375Dimension (in.): 3 x 26.52 latches6ft cord (18-2) with cj14 plugCaution: vessel must be stirred when heating blanket is in operation
Bellco Glass, Inc. Stainless Steel Bioreactor Headplate, 3L
3L bioreactor headplate . Manufactured from 316l stainless steel with ra 32 finish or better inside and out. Fittings are sold separately as part of the system. MADE IN THE USA.
Chemglass Life Sciences PTFE Baffle Cage, 4-Blade, 100mm ID Flange, for 500mL Vessel
PTFE Baffle Cage, 4-Blade, 100mm ID Flange, for 500mL VesselPTFE insertable 4-blade baffle cage system for CG-1929-X series 100 and 150mm reactor systems. Baffle assembly has 4ea PTFE rectangular baffles attached 90 degrees apart to a 100 or 150mm flange ring. Flange ring is inserted between the reaction vessel lid and reaction vessel. PTFE flange ring has an o-ring groove to accept a CG-147 O-Ring. Please Note: CG-147 Perfluoro O-Rings are recommended for use with the baffle assembly.
Chemglass Life Sciences ChemRxnHub TRIPLE Support Stand ONLY
ChemRxnHub TRIPLE Support Stand ONLY. This unique stationary reactor stand is designed to fit into most benchtop hoods. ChemRxnHub Triple Stand can hold three reactors from 300mL to 5L. The stand provides support for the Reaction Vessel(s), Glassware, Overhead Stirring Motor, and Temperature Monitor. Stand includes removable spill tray. The weight of the stand is 128lbs.
Chemglass Life Sciences Chemglass Reaction Vessel Lid, 6-Neck, 50 mL (CG-MR-50L2) - Mettler EasyMax compatible
Chemglass CG-MR-50L2 is a six-neck reaction vessel lid for 50 mL laboratory reactors, designed for bench-scale synthesis and process development. The lid provides multiple sealed access ports for probes, additions, and fittings, enabling flexible setups and integration with automated reactor platforms.
- Six-neck configuration for multiple fittings and probes.
- 50 mL capacity suitable for small-scale reactions.
- Joint sizes: (1) 14/20 standard neck with 10/18 outer; (2) two GL-14 side necks; (1) 7/15 neck; (1) 10/18 neck.
- Borosilicate glass construction for chemical resistance and thermal stability.
- Designed for use with automated bench-top reactor systems.
- In-stock availability for immediate replacement.