Ice Makers
Equipment designed to make aqueous and dry ice; products may be handheld, benchtop, or floor models. Includes water filters and filtration systems for ice makers.
Ice makers are used to produce ice from water or “dry ice” from liquid nitrogen. Most laboratories have access to an ice machine, since ice is used to keep samples and reagents cold during experiments or other lab work.
Ice makers are typically large floor-model units that are plumbed directly to a water source. However, smaller capacity benchtop and undercounter units are also available. Ice makers may contain replaceable air and water filters or cartridges and may have antimicrobial features that help to maintain water and ice quality.
Ice makers vary in size based on the amount of ice they can produce and store. They also vary based on the type or shape of ice produced, including:
- Cubes
- Flakes
- Nuggets/pearl-shaped
Some ice makers dispense water and ice; others have large covered bins from which one must scoop or otherwise transfer the ice into a secondary container.
Ice-making may be continuous until a certain threshold is reached, while other ice makers can be programmed to meet fluctuating demands and high- and low-use periods. Most ice makers run on a regular current, much like refrigerators or freezers. They usually vent toward the front, which allows them to be placed in smaller or enclosed areas.
Laboratory dry ice makers, produce small quantities of dry ice, usually about a 16 oz. (454 g) block at a time. One block typically takes less than five minutes to form. Production requires a tank of liquid carbon dioxide with a dip tube; a 50-pound tank can produce anywhere from eight to 16 blocks of dry ice. Other versions that produce dry ice as flakes or “snow” are also available.
Bel-Art™ Economy Frigimat™ Dry-Ice Maker
Each 50 lb. cylinder of liquid CO2 will produce 8 or 9 blocks of dry ice measuring 3.62 x 4 in. (8.5 x 11 cm) long
Nordon Hoshizaki™ PF/SF Ice Storage Bin
Nordon Hoshizaki™ Open Top Storage Bin is durable, sustainable, and reliable—all with attractive an appearance to enhance your workspace.
Nordon Hoshizaki™ Ice Machine and Dispenser
Nordon Hoshizaki Ice machine and dispenser features the CycleSaver 12, every 12 hrs, it performs 15 min purge to clean itself and is protected by H-GUARD Plus antimicrobial agent.
CurranTaylor™ Scotsman™ Filters and Filter Cartridges for Ice Makers
Scotsman™ Filters and Filter Cartridges for Ice Makers keeps ice makers cleaner while reducing failures due to lime scale, dirt, and excessive chlorine.
CurranTaylor™ Ice Maker Installation Kit
CurranTaylor Ice Maker Installation Kit includes the necessary supplies for an initial installation.
Thermco™ DI800 - Dry Ice Machine
Thermco™ DI800 - Dry Ice Machine utilizes a patented heat exchange to increase yield by up to 30%
Bel-Art™ Frigimat™ Dry Ice Maker
Frigimat™ Dry Ice Maker produces a block of dry ice in one to two minutes.
Bel-Art™ Frigimat™ Dry Ice Maker
Produces dry ice in four minutes.
Ace Glass, Inc. Cooler, condensate, model R220, glassware sets C, RB and R
Borosilicate glass replacement jacketed condensate cooler for use in rotary evaporator Model R220 glassware sets C, RB & R. Inner ball joints include CAPFE o-rings. Includes black SVL caps & red GL thread caps.
BURKLE INC Dry ice maker
SnowPack enables you to obtain a -79 C dry ice tablet weighing 50 or 250 g within a few moments without complicated technology and without electricity You can therefore obtain low-cost cooling to very low temperatures at any time you like Dry ice is easy to handle odourless and flavourless The SnowPack dry ice machine can be installed on any commercial CO2-bottle with a standpipe (without pressure regulator) (thread W 21 80 x 1/14 according to DIN 477-1 No 6)
Electron Microscopy Sciences MAC 37 Auger Standards and Faraday Cup, 25 mm
MAC has developed multi-element blocks of reference materials suitable for the compilation of a reference library of Auger sensitivity factors when used with the Auger Electron Microscopy (AES). A carefully selected range of elements or compounds will enable the surface analyst to compile a valuable reference library of spectra. A Faraday Cup, for the accurate measurement of specimen current, is available as an option.
Multi-element blocks containing up to 50 reference materials can be made to suit the configuration of the most instrument. The reference material each has an exposed area about 2 square mm and are polished to a 1/4 micron diamond finish. The block of reference material is made from AISI 304 grade austenitic.
All blocks are supplied with certificates of analysis.
Size: 25 mm
