Vacuum Tubing
Accuflow Systems Saint-Gobain PharMed BPT Tubing, 1/8 in ID, 1/4 in OD
PharMed BPT tubing is a biocompatible, high-performance peristaltic pump tubing formulated for sensitive bioprocess and diagnostic applications. It delivers extended flex life and chemical resistance compared with standard silicone tubing, and supports common cleaning and sterilization methods.
- 1/8 in inner diameter, 1/4 in outer diameter, 25 ft length.
- Opaque cream appearance, Shore A 64 hardness.
- Meets USP Class VI, USP <87>, and ISO 10993-5 biocompatibility standards.
- Autoclavable for repeated cycles; compatible with gamma sterilization up to 50 kGy.
- Temperature range up to 275 °F (135 °C); low temperature embrittlement at -75 °F (-59 °C).
- Very good chemical resistance; excellent resistance to acids, alkalis, and oxidizers.
- Superior peristaltic pump performance versus silicone; demonstrated 1,000+ hours in comparative tests.
- Opaque to visible and UV light, protecting light-sensitive fluids.
Accuflow Systems Saint-Gobain PharMed BPT Tubing, 5/8 in ID, 25 ft
PharMed BPT tubing from Saint-Gobain is a thermoplastic elastomer tubing engineered for demanding peristaltic pump applications in bioprocessing, diagnostics, and laboratory fluid handling. It provides extended flex life compared with silicone, broad chemical resistance, and an opaque profile that helps protect light-sensitive fluids.
- Material: proprietary thermoplastic elastomer formulated for peristaltic pumping.
- Dimensions: 5/8 in ID, 7/8 in OD, 1/8 in wall, 25 ft length.
- Compliance: USP Class VI and ISO 10993-5 biocompatibility.
- Temperature range: -75°F to 275°F (-59°C to 135°C) service range.
- Chemical resistance: very good general resistance; excellent acid, alkali, and oxidizer resistance.
- Color and opacity: opaque cream, blocks visible and UV light.
- Typical applications: peristaltic pump lines, cell harvest and media transfer, diagnostic fluid handling.
Accuflow Systems Saint-Gobain PharMed BPT Tubing, 1/16 in ID, 1/8 in OD
Saint-Gobain PharMed BPT peristaltic pump tubing provides a biocompatible fluid-contact surface, extended pump life compared with silicone, and resistance to common sterilization methods suitable for bioprocessing and laboratory fluid transfer.
- Formulated thermoplastic elastomer for peristaltic pumping.
- Dimensions: 1/16 in ID, 1/8 in OD, 1/32 in wall, 25 ft length.
- Opaque cream color to protect light-sensitive fluids.
- Meets USP Class VI and ISO 10993-5 biocompatibility requirements.
- Sterilization: autoclavable (30 min at 121 °C), tolerant to 50 kGy gamma radiation.
- Maximum service temperature 275 °F (135 °C); low temperature embrittlement at -75 °F (-59 °C).
- Max working pressure 24 psi at 73 °F, 14 psi at 180 °F; vacuum rating 29.9 in Hg.
- Typical uses: cell harvest, bioreactor lines, aseptic filling, filtration, and diagnostics.
Accuflow Systems Saint-Gobain Tygon ND 100-80 Tubing, 0.03 in ID, 500 ft
Tygon ND 100-80 is a thermoplastic microbore tubing formulated for medical and analytical fluid transfer where small diameters and thin walls are required. It meets USP <88> Class VI biological test criteria for fluid path applications and is designed to provide higher pressure resistance at microbore dimensions.
- Microbore inner diameter 0.03 in, outer diameter 0.09 in, wall thickness 0.03 in.
- Supplied in 500 ft coils for extended runs and instrument use.
- Thermoplastic formulation offering higher durometer for improved pressure resistance.
- Suitable for drug delivery, cannulas, external drainage, and diagnostic equipment.
- Meets biological test requirements for fluid path applications (USP <88> Class VI).
Accuflow Systems Saint-Gobain Tygon Tubing, 3/8 in I.D., 5/8 in O.D.
High-purity, textile-reinforced thermoplastic tubing designed for pressurized fluid transfer. The tubing features a smooth inner bore to preserve product integrity and is suitable for laboratory, pharmaceutical, and industrial fluid-handling applications.
- High-purity thermoplastic construction.
- Textile reinforcement for increased pressure resistance.
- Inner diameter 3/8 in (9.5 mm).
- Outer diameter 5/8 in (15.9 mm).
- Wall thickness 1/8 in (3.2 mm).
- Length 50 ft (15.2 m).
- Smooth inner bore to minimize fluid interaction.
Accuflow Systems Saint-Gobain Tygon E-1000 Tubing, 3/8 in ID, 50 ft
Saint-Gobain Tygon E-1000 ultra-soft laboratory tubing engineered for peristaltic pumps and complex laboratory setups. The tubing is a clear, non-DEHP thermoplastic elastomer that remains flexible at very low temperatures, resists twisting and collapse, and exhibits low resistance to compression for low-torque or battery-driven peristaltic pumps.
- Ultra-soft thermoplastic elastomer tubing for peristaltic pumps and laboratory dispensing.
- Size: 3/8 in inner diameter, 5/8 in outer diameter, 1/8 in wall thickness.
- Length: 50 ft standard package length.
- Temperature range: remains flexible to -67°F (-55°C), maximum 125°F (52°C).
- Hardness: 40 Shore A for minimal compression resistance.
- Clear tubing for unobstructed visual monitoring of flow.
- Non-DEHP formulation and resistant to corrosive chemicals.
- Suitable for vent and drain lines, analytical instruments, and synthesis and research setups.
Accuflow Systems Saint-Gobain Tygon Tubing, 3/16 in, 1/16 in Wall, 50 ft
Tygon 2375 Ultra Chemical-Resistant tubing delivers clear, flexible thermoplastic elastomer construction engineered for compatibility with aggressive chemicals and cleaning agents. Supplied on a 50 ft roll, this tubing provides stable, phthalate-free fluid transfer suitable for laboratory, bioprocessing, and industrial applications.
- Clear thermoplastic elastomer tubing.
- 3/16 in inside diameter, 5/16 in outside diameter, 1/16 in wall.
- 50 ft roll length.
- Chemical resistant to acids, bases, ketones, salts, and alcohols.
- Phthalate-free, plasticizer-free construction to minimize fluid contamination.
- Maximum service temperature up to 130 °F.
- Typical working pressure approximately 30 psi; application dependent.
- Suitable for laboratory and process fluid transfer and chemical handling.
Accuflow Systems Saint-Gobain Tygon Tubing, Non-DEHP PVC, 3/8 in ID, 50 ft
Tygon E-3603 tubing is a crystal-clear, flexible thermoplastic tube formulated without DEHP for laboratory and medical fluid-transfer applications. It provides high clarity for visual inspection, consistent lot-to-lot performance, and mechanical properties suitable for peristaltic pumps, vacuum lines, and general laboratory use.
- 3/8 in (9.5 mm) inner diameter, 5/8 in (15.9 mm) outer diameter, 1/8 in (3.2 mm) wall thickness.
- 50 ft (15 m) packaged length.
- Non-DEHP, phthalate- and BPA-free PVC formulation.
- Shore A hardness 56, tensile strength 1750 psi, ultimate elongation 425%.
- Maximum recommended temperature 165 °F (74 °C); brittle temperature -51 °F (-46 °C).
- Maximum working pressure 25 psi at 73 °F; vacuum service to 29.9 inHg.
- Minimum bend radius 1-1/8 in (28.6 mm) for standard sizes.
- Smooth inner surface for low contamination and reliable fluid flow.
Accuflow Systems Saint-Gobain Pump Tubing, Tygon XL-60, 1/8 in ID, TPE
Saint-Gobain Tygon XL-60 tubing is a long-life thermoplastic elastomer (TPE) formulated for peristaltic pump applications. It offers extended pump life compared with standard silicone or PVC tubing, remains flexible at low temperatures, and resists elevated operating temperatures.
- Material: thermoplastic elastomer (TPE), Shore A 60.
- Designed for peristaltic pump applications, long-life formulation.
- Internal diameter 1/8 in, outer diameter 1/4 in, wall thickness 1/16 in.
- Supplied in 50 ft lengths.
- Temperature range -40°F to 250°F (maximum recommended 250°F / 121°C).
- Pump life exceeding 500 hours under typical operating conditions.
Accuflow Systems Saint-Gobain Tygon Tubing, 1/4 in I.D., 50 ft, Textile Reinforced
Saint-Gobain Tygon 2475 I.B. high-pressure thermoplastic tubing, 1/4 in I.D. x 1/2 in O.D., 50 ft pack, combines textile-braid reinforcement and a smooth, low-sorption inner surface for reliable, high-purity fluid transfer. Formulated without added plasticizers and with clear construction, it supports applications requiring low extractables, visual inspection, and elevated working pressures.
- Textile-braid reinforcement for elevated working pressures.
- No added plasticizers to minimize extractables.
- Low-wetting, ultra-smooth inner surface to reduce sorption and microbial buildup.
- Clear construction allows visual inspection of fluid path.
- Dimensions: 1/4 in I.D., 1/2 in O.D., 50 ft pack length.
- Lower gas permeation than standard silicone tubing.
Accuflow Systems Saint-Gobain Tygon Tubing, 1/32 in by 3/32 in, 50 ft
Crystal-clear, phthalate-free laboratory tubing designed for instrumentation connections, venting, drain lines, and vacuum applications. The tubing resists flex-fatigue and abrasion, features a glassy-smooth inner bore to minimize buildup, and is marked at 1-foot intervals for easy measurement. Suitable for autoclave and ethylene oxide sterilization, supplied in 50 ft lengths with 1/32 in I.D. and 3/32 in O.D.
- Crystal-clear, phthalate-free construction.
- Resists flex-fatigue and abrasion.
- Marked at 1-foot intervals for measurement.
- Glassy-smooth inner bore reduces buildup.
- Sterilizable by autoclave and ethylene oxide.
- Dimensions: 1/32 in I.D., 3/32 in O.D., 50 ft length.
Accuflow Systems Saint-Gobain Silicone Tubing, Platinum-Cured, 0.156 in ID, 0.41 in OD
Sani-Tech STHT-C platinum-cured silicone tubing designed for sanitary biopharmaceutical fluid transfer. The product provides a smooth, ultra-pure bore, good thermal stability, and traceability marking for sizes with ID ≥ 1/16 in.
- Platinum-cured silicone material, biopharmaceutical grade.
- Inner diameter 0.156 in (3.97 mm), outer diameter 0.41 in (10.32 mm).
- Wall thickness 0.13 in (3.18 mm), 25 ft coil standard.
- Durometer hardness 50 Shore A for the STHT-C formulation.
- Autoclavable and resistant to adherence of blood and sanitary fluids.
- Laser marked for part number and lot code traceability on IDs ≥ 1/16 in.
- Suitable for pharmaceutical and biopharmaceutical fluid transfer and single-use assemblies.
Accuflow Systems Saint-Gobain Tubing, 1/2 in ID, 3/4 in OD, 50 ft
Tygon 2475 IB tubing is a crystal-clear, plasticizer-free thermoplastic tubing engineered for high-purity and medical fluid transfer applications. It minimizes extractables, offers low gas permeation compared with silicone, and meets USP Class VI biocompatibility standards. Typical uses include diagnostic reagent delivery, medical dispensing, cell and tissue culture transport, and cleanroom transfer lines.
- Plasticizer-free thermoplastic construction minimizes extractables and leachables.
- Crystal-clear wall enables visual inspection of the fluid path.
- Smooth inner bore limits protein and particle retention.
- Lower gas permeation than silicone, suitable for sensitive fluids.
- 1/2 in ID, 3/4 in OD, 1/8 in wall, 50 ft length for long runs.
- Designed for high-purity pressure applications and meets USP Class VI biocompatibility.
Accuflow Systems Saint-Gobain PharMed BPT Pump Tubing, 0.020 in ID, 25 ft
Biocompatible peristaltic pump tubing formulated for reliable fluid transfer in pharmaceutical, bioprocessing, and laboratory systems. The tubing offers extended service life in peristaltic pumps, excellent chemical resistance, and compatibility with common sterilization methods used in aseptic processes.
- Inner diameter 0.020 in (0.5 mm).
- Outer diameter 0.145 in (3.7 mm), wall thickness 1/16 in (1.6 mm).
- Length 25 ft (7.6 m) packaged.
- Meets USP <88> Class VI and related biocompatibility standards.
- Withstands repeated autoclaving (up to five cycles) and gamma radiation up to 50 kGy.
- Operating temperature range -75 °F (-59 °C) to 275 °F (135 °C).
- Designed for peristaltic/roller pump use, aseptic filling, and transfer of shear-sensitive fluids.