Stirrer Accessories
Wilmad Labglass STIR BRNG 10MM PTFE COMP 45/50
Stirrer Bearing, Precision, PTFE, Complete, 10mm. Joint Size: [ST] 45/50. Complete assembly includes PTFE Stirrer Bearing, PTFE bushing, saddle O-Ring, threaded heavy wall glass adapter and top screw cap.
Wilmad Labglass STIR BRNG 10MM PTFE COMP 29/42
Stirrer Bearing, Precision, PTFE, Complete, 10mm. Joint Size: [ST] 29/42. Complete assembly includes PTFE Stirrer Bearing, PTFE bushing, saddle O-Ring, threaded heavy wall glass adapter and top screw cap.
Wilmad Labglass STIR SHAFT GLAS POL 22L
Stirrer Shaft, Button Style, Glass Rod. Shaft O.D.: 10mm; Overall Length: 590mm; Flask Capacity: 22000mL. Precision ground and polished with side button for attachment of Stirrer blades.
Wilmad Labglass STIRRER BEARING PTFE 10MM
Stirrer Bearing, Precision, PTFE, Bearing Only. Replacement PTFE Bearing for LG-9444 series Stirrer Bearings. For use with 10mm OD Stirrer shafts.
Wilmad Labglass STIR SHAFT SSTEEL 100-5000ML
Stirrer Shaft, Button Style, Polished, Stainless Steel. Shaft O.D.: 10mm, Overall Length: 515mm; Fits Flask Capacity: 100-5000mL. Precision ground and polished with side button for attachment of Stirrer blades.
Chemglass Life Sciences Stirrer Blade, PTFE, 10mm, for 500mL to 1000mL Flasks, 19mm Width x 75mm Length, 24/40 minimum joint clearance
Stirrer Blade, PTFE, 10mm, for 500mL to 1000mL Flasks, 19mm Width x 75mm Length, 24/40 minimum joint clearance. Stirrer blade made of 1/8" thick solid PTFE for use with both Chem-Stir™ and button style stirring shafts having a 10mm OD.
Chemglass Life Sciences 10ft Extension Cord, Type "J" (Black), Standard to Mini Plug
10ft Extension Cord, Type "J" (Black), Standard to Mini Plug. Coiled extension cords to connect thermocouples to instrumentation such as temperature monitors, controllers and data loggers. Cords are 10ft long and made of 26-gauge multistrand wire with PVC insulation. All cords have a female standard (OST) with a choice of a male standard (OST) or mini (SMP) connection.
Chemglass Life Sciences Stirring Shaft, 10mm, Polished, 480mm OAL
Stirring Shaft, 10mm, Polished, 480mm OAL. A 10mm precision ground and polished stirrer shaft for use with PTFE bearings and CG-2091 and CG-2092 PTFE agitators. Flat ground section extends half way up shaft and permits positive seating of the PTFE locking screws.
Chemglass Life Sciences 10mm Tru-Stir Stirrer Shaft Coupling, Tool-Free, 5/16" Upper Male Coupling, For Use with 3-Jaw Jacobs Chuck
10mm Tru-Stir Stirrer Shaft Coupling, Tool-Free, 5/16" Upper Male Coupling, For Use with 3-Jaw Jacobs Chuck. The unique design of our Tool-Free Tru-Stir stirrer shaft coupling eliminates the need to use rubber hose or universal adapters to attach your stirrer shafts to overhead stir motors. Coupling incorporates a unique helical stainless steel spring permitting up to 1/4¿ of offset misalignment and 45¿ of angular misalignment. Coupling is rated for 24 in-lbs of torque without the backlash normally associated with common coil springs.Lower portion of coupling has an anodized aluminum compression nut that secures a 10mm diameter stirrer shaft via a neoprene insert. This unique design allows a Tool-Free connection between the stirrer shaft and coupling. Upper adapter is 5/16¿ diameter, which permits the coupling to be used with a standard Jacobs style 3-jaw chuck. Overall length of the coupling is 4-3/4¿.
Chemglass Life Sciences 10mm Stirring Shaft, Chem-Stir, Polished, For Use With 2L-12L Flasks, 530mm OAL, Complete with PTFE Nut and Bolt
10mm Stirring Shaft, Chem-Stir, Polished, For Use With 2L-12L Flasks, 530mm OAL, Complete with PTFE Nut and Bolt. A 10mm OD precision ground and polished stirrer shaft with our patented** Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. For use with PTFE bearings such as the CG-2077. Polished shaft will not cause abrasion to the sealing surfaces of the PTFE bearing, thereby allowing a vacuum tight seal. Uses the same PTFE nut and bolt blade attachment method as the CG-2074 ground shaft. PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2074.
Chemglass Life Sciences 10mm Stirring Shaft, Chem-Stir, Polished, For Use With 100mL-5L Flasks, 460mm OAL, Complete with PTFE Nut and Bolt
10mm Stirring Shaft, Chem-Stir, Polished, For Use With 100mL-5L Flasks, 460mm OAL, Complete with PTFE Nut and Bolt. A 10mm OD precision ground and polished stirrer shaft with our patented** Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. For use with PTFE bearings such as the CG-2077. Polished shaft will not cause abrasion to the sealing surfaces of the PTFE bearing, thereby allowing a vacuum tight seal. Uses the same PTFE nut and bolt blade attachment method as the CG-2074 ground shaft. PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2074.