Electrical Heating Mantles without Controllers
Electrical Heating Mantles without Controllers
An ideal heating solution for round-bottomed flasks in a laboratory setting, heating mantles without controllers use an external device to regulate temperature. Often used as an alternative to Bunsen burners, these self-supporting mantles have an outer shell made fiberglass cloth.
Mantle construction includes slip-in and zip-up options, both of which can be used with a basket ring stand. Temperature controllers are required for operation but are not included with these mantles.
Electrical heating mantles work well when a container or vessel requires heating over a long period of time. In these instances, heating with a hotplate or Bunsen burner is both less effective and less practical. Electrical heating mantles distribute heat more evenly over the surface of the vessel and generate fewer “hotspots.” They can also accommodate unusually or irregularly shaped flasks and other glassware.
Glass containers can be placed directly into solid or flexible electrical heating mantles, which are shaped or otherwise designed to reduce the chances of breakage. The actual heating element is insulated to prevent excessive variations in temperature.
Electrical heating mantle construction includes slip-in and zip-up options, either of which can be used with a basket ring stand. Temperature controllers are required for operation but must be purchased separately.
Fisherbrand™ Lower Hemispherical Cloth Heating Mantle
Fisherbrand™ Lower Hemispherical Cloth Heating Mantle provides a safe and uniform heat distribution for round-bottom flasks.
Fisherbrand™ Metal-Housed Magnetic Stirring Heating Mantle
Fisherbrand™ Metal-Housed Magnetic Stirring Heating Mantle has a deep hull to minimize damage from spills and allow for maximum heat transfer with minimal risk of flask breakage.
BriskHeat™ Lower Hemisphere Mantles for Flasks, No Controller
Uniform heat distribution for round-bottom flasks
Fisherbrand™ Soft Sided Table Top Heating Mantle
Fisherbrand™ Soft Sided Table Top Heating Mantle is a self-supporting table top heating mantle, used to provide safe and uniform heat distribution for round-bottom flasks.
Fisherbrand™ Upper Hemispherical Cloth Heating Mantle
Fisherbrand™ Upper Hemispherical Cloth Heating Mantle provides a safe and uniform heat distribution for round-bottom flasks.
BriskHeat™ Upper Hemispherical Mantles for Flasks, No Controller
Uniform heat distribution for round-bottom flasks
Chemglass Life Sciences 2000mL Glas-Col Heating Mantle, Series O, Hemispherical, 500 Watts
2000mL Glas-Col Heating Mantle, Series O, Hemispherical, 500 Watts. The Glas-Col Series O mantle is a hemispherical style, meaning it covers only the bottom half of the flask. This allows full view of contents. The mantle accommodates single and multi-flasks. It should be used with the Series O supports. All mantles are 115 Volts and are supplied with a separable 4 foot, 2 wire cord and locking connector. For Series O supports see CG-10010 or CG-10012.
Glas Col LLC Heating Mantle
Aluminum housed mantle for 1L spherical flask, to 600 degrees C maximum internal operating temperature, 600W, 115V CSA
Chemglass Life Sciences 500mL Glas-Col Heating Mantle, Series O, Cylindrical, 4 3/16in ID x 4in Depth, 250 Watts
500mL Glas-Col Heating Mantle, Series O, Cylindrical, 4 3/16in ID x 4in Depth, 250 Watts. This Glas-Col Series O mantle is used with a round bottom cylindrical reaction vessel, CG-1920 and CG-1922, featuring a Duran flange. The mantle covers the bottom and sides of the vessel leaving enough room under the flange to safely remove the reaction vessel clamp while the mantle is in place. Mantle is glass fabric, 115 volts, and is supplied with a separable 4 foot, 2 wire extension cord with locking connector. The 10,000mL size has two circuits at the listed wattage.
Chemglass Life Sciences 3000mL Glas-Col Heating Mantle, Series TM, Spherical, 500 Watts
3000mL Glas-Col Heating Mantle, Series TM, Spherical, 500 Watts. The Glas-Col Series TM spherical flask mantle covers only the flasks bottom half, letting you see its full contents. Larger sizes have multiple circuits for ease of temperature control when a flask is less than half full. The Series TM mantle is available with a bottom hole for flask drain on a special order basis. Terminal box models are available with switches and pilot lights. Mantles are 115 Volt.
Chemglass Life Sciences Glas-Col Mantle Extension Support for 100-200mL Series O Mantle, 4 7/8in ID
Glas-Col Mantle Extension Support for 100-200mL Series O Mantle, 4 7/8in ID. This lattice mount support holds spherical and hemispherical Glas-Col Series O mantles up to 5-liter capacity. The steel support, with its fabric strap basket, is strong, handy and durable. Attaches easily to stable ring stands or distillation racks. Supports are painted gray. This mantle support is made from 3/8in diameter rod.
Chemglass Life Sciences 12000mL Glas-Col Heating Mantle, Series O, Hemispherical, 2 @ 650 Watts
12000mL Glas-Col Heating Mantle, Series O, Hemispherical, 2 @ 650 Watts. The Glas-Col Series O mantle is a hemispherical style, meaning it covers only the bottom half of the flask. This allows full view of contents. The mantle accommodates single and multi-flasks. It should be used with the Series O supports. All mantles are 115 Volts and are supplied with a separable 4 foot, 2 wire cord and locking connector. For Series O supports see CG-10010 or CG-10012.