Vacuum Tubing
Med Vet International Dynarex Oxygen Tubing Nut Nipple Adaptor, 50/Case
Dynarex Resp-O2 Oxygen Tubing Adaptors are designed to increase the connectivity and reach of oxygen tubing during respiratory treatments. Designed to extend adaptability of oxygen tubing Not made with natural rubber latex
Accuflow Systems Saint-Gobain High-Purity Tubing, 1/16 in ID, 3/16 in OD
Tygon 2475 high-purity tubing is a plasticizer-free, clear thermoplastic designed for contamination-sensitive fluid transfer in laboratory and bioprocess applications. It provides low extractables and adsorption, a smooth inner bore to reduce particulate entrapment, and compatibility with common sterilization methods.
- ID: 1/16 in.
- OD: 3/16 in.
- Wall thickness: 1/16 in.
- Formulation: plasticizer free (Formulation 2475)
- Package length: 50 ft
- Compliance: USP Class VI and FDA
- Working pressure at 73°F: 85 psi
- Maximum recommended operating temperature: 125 °F
- Sterilization: ethylene oxide, radiation (up to 2.5 MRad)
- Color: Clear
Accuflow Systems Saint-Gobain Tygon E-3603 Tubing, 7/16 in ID, 50 ft
Tygon E-3603 is a clear, flexible thermoplastic tubing formulated for reliable laboratory and diagnostic fluid transfer where visual inspection, chemical compatibility, and low extractables are important.
- Clear, flexible tubing for visual inspection and fluid handling.
- Inner diameter: 7/16 in (11.1 mm).
- Outer diameter: 5/8 in (15.9 mm), wall thickness 3/32 in (2.4 mm).
- Package length: 50 ft (15 m).
- Shore A hardness: 56; minimum bend radius: 1-3/4 in (44.4 mm).
- Maximum recommended operating temperature: 165 °F (74 °C).
- Maximum working pressure @ 73 °F: 18 psi (1.2 bar); vacuum rating: 15 inHg (381 mmHg).
- Glassy-smooth inner bore resists buildup, reducing carryover and simplifying cleaning.
Accuflow Systems Saint-Gobain C-Flex Tubing, 3/8 in ID, Translucent, 50 ft
C-Flex TPE tubing, formulation 374, is a translucent thermoplastic elastomer tubing supplied as a 50 ft coil. It is designed for high-purity fluid transfer where sealability and weldability are required, and is commonly used in biopharmaceutical and pharmaceutical process systems.
- Thermoplastic elastomer construction for flexibility and chemical compatibility.
- Translucent appearance for visual flow monitoring.
- Inner diameter: 3/8 in, outer diameter: 1/2 in.
- Supplied as a 50 ft coil for continuous runs.
- Compatible with aseptic welding and sealing processes.
- Intended for biopharmaceutical and high-purity fluid-transfer applications.
Accuflow Systems Saint-Gobain Tygon ND 100-65 Tubing, 1/4 in I.D., 100 ft
Tygon ND 100-65 tubing is a medical/surgical-grade flexible tubing formulation designed for reliable fluid transfer in clinical and laboratory equipment. It provides precise, consistent dimensions and flexible handling for applications requiring clarity and predictable performance.
- Medical/surgical grade formulation for clinical and laboratory fluid handling.
- 1/4 in inner diameter, 7/16 in outer diameter, 3/32 in wall thickness.
- 100 ft packaged length for continuous runs and assemblies.
- Flexible, transparent construction for visual monitoring of fluid flow.
- Suitable for peristaltic pump applications and general tubing assemblies.
Accuflow Systems Saint-Gobain Versilon FEP Tubing, 0.094 in ID, 0.156 in OD
Versilon FEP tubing is a transparent, high-purity fluoropolymer tube designed for chemical transfer and fluid handling. It resists most solvents, acids, and fuels, and maintains performance at elevated temperatures.
- Material: FEP
- Inner diameter: 0.094 in (2.38 mm)
- Outer diameter: 0.156 in (3.97 mm)
- Wall thickness: 0.031 in (0.79 mm)
- Maximum temperature: up to 400 °F (204 °C)
- Color: Transparent
- Common lengths: 50 ft and 100 ft
- Resistant to most solvents, acids, and fuels
Accuflow Systems Saint-Gobain Tygon E-3603 Tubing, Special PVC, 3/8 In, 15 m
Clear special PVC process tubing for laboratory and process fluid transfer. The tubing combines flexibility, low permeability, and a glassy smooth inner bore for easy cleaning; coils are marked for measuring and the tubing holds full vacuum at room temperature.
- 3/8 in inner diameter, 9/16 in outer diameter, 3/32 in wall.
- 15 m length per coil.
- Special PVC material, clear.
- Operating temperature range -46°C to +74°C.
- Maximum working pressure 1.4 bar at 23°C.
- Meets FDA, EU food, NSF 51, USP Class VI, and Japan food standards; Prop 65 noted.
- Does not contain BPA or phthalates.
- Not peristaltic pump compatible.
Accuflow Systems Saint-Gobain Tygon Tubing, Plasticizer-Free, 1/8 in ID, 50 ft
Tygon 2475 tubing is a crystal-clear, plasticizer-free thermoplastic designed for high-purity medical, diagnostic, and biopharmaceutical fluid transfer. It provides low gas permeation, reduced leachables, and a smooth inner bore to minimize particle and protein retention, making it well suited for reagent delivery, dispensing, and cleanroom transfer applications.
- Plasticizer-free thermoplastic reduces leachables and contamination risk.
- Low gas permeation protects moisture-sensitive fluids from oxidation and moisture loss.
- Meets USP Class VI biocompatibility for medical and diagnostic use.
- Smooth inner bore limits protein and particle retention.
- Transparent material allows visual monitoring of flow and air bubbles.
- 50 ft length, 1/8 in inner diameter, 1/4 in outer diameter, 1/16 in wall thickness.
Accuflow Systems Saint-Gobain Tygon Tubing, Fuel Lubricant, 3/16 in ID, 50 ft
Flexible fuel and lubricant tubing formulated to resist swelling and hardening from hydrocarbon-based fluids. Suitable for small-engine fuel lines and general fuel and lubricant transfer applications.
- 3/16 in inner diameter, 5/16 in outer diameter.
- 1/16 in wall thickness.
- 50 ft length, bulk coil.
- Translucent yellow for fluid identification.
- Thermoplastic elastomer construction, hydrocarbon-resistant formulation.
- Maximum working pressure approximately 35 psi at 73°F for this nominal size.
- Shore A hardness around 57.
- Operating temperature range -35°F to 165°F (-37°C to 74°C).
- Typical applications include fuel and lubricant transfer, small engine fuel lines, and petroleum/alcohol blends.
Accuflow Systems Saint-Gobain PharMed BPT Tubing, 5/16 in ID, 25 ft
PharMed BPT peristaltic pump tubing is a biocompatible thermoplastic engineered for long flex life and reliable low-shear fluid transfer. It is opaque to visible and UV light, offers broad resistance to acids, alkalis, and oxidizing agents, and is intended for medical, diagnostic, and laboratory applications requiring biocompatibility and chemical resistance.
- Peristaltic pump tubing for low-shear fluid transfer.
- Material: biocompatible thermoplastic (BPT formulation).
- I.D. 5/16 in (7.9 mm), O.D. 7/16 in (11.1 mm), wall 1/16 in (1.6 mm).
- Length: 25 ft (7.6 m) packaged.
- Opaque to visible and UV light to protect light-sensitive fluids.
- Resistant to acids, alkalis, and oxidizing agents.
- Typical applications: diagnostic analyzers, reagent transfer, infusion systems, and sample transport.
Accuflow Systems Saint-Gobain Tygon Tubing, S-50-HL, 5/8 in ID, 7/8 OD
Tygon S-50-HL medical tubing is a clear, flexible, medical-grade formulation designed for reliable fluid transfer in blood-contact and peristaltic pump applications. This spool provides 50 ft of 5/8 in inner diameter tubing with a 7/8 in outer diameter, characterized for biocompatibility and compatibility with common sterilization methods.
- Medical-grade formulation characterized to ISO 10993 series and meets USP Class VI criteria.
- 5/8 in inner diameter, 7/8 in outer diameter, 1/8 in wall thickness, 50 ft spool.
- Suitable for blood, IV solutions, dialysis, chemotherapy delivery, and minimally invasive devices.
- Compatible with EtO, gas, and gamma sterilization methods.
- Crystal clear for visual monitoring of fluid flow.
- Non-wetting surface permits complete drainage and reduces residual fluid retention.
- Demonstrates hemocompatibility and is non-toxic, non-hemolytic, and non-pyrogenic; not intended for implant use.
Accuflow Systems Saint-Gobain PFA Tubing, 3/8 in I.D., 0.062 in Wall
Versilon PFA tubing is a flexible, chemically inert fluoropolymer designed for ultrapure chemical and fluid transfer in laboratory and industrial systems. The tubing offers consistent dimensions and PFA's chemical resistance for applications requiring low extractables and reliable fluid handling.
- Material: Perfluoroalkoxy alkane (PFA).
- Inner diameter: 3/8 in (0.375 in).
- Outer diameter: 1/2 in (0.50 in).
- Wall thickness: 0.062 in.
- Length: 100 ft package.
- Typical applications: semiconductor, laboratory, environmental, and pharmaceutical fluid handling.
- Key benefits: excellent chemical and diffusion resistance, low leachables for ultrapure fluids.
Accuflow Systems Saint-Gobain Silicone Stopper, 41 x 49 x 40 mm, 5/Pack
Saint-Gobain Sani-Tech platinum-cured silicone stopper for laboratory and bioprocess applications. The stopper measures 41 x 49 x 40 mm and is supplied in packs of five. It provides an aseptic seal, resists cracking and spallation, shows no particle migration, and is fully autoclavable and sterilizable.
- Ultra-pure, platinum-cured silicone.
- Dimensions 41 x 49 x 40 mm.
- Pack of 5 stoppers.
- Fully autoclavable and sterilizable.
- Resists cracking and spallation.
- No particle migration; imparts no taste or odors.
- Suitable for carboys, solution and media bottles, and laboratory apparatus.