HPLC Columns
Waters Corp Waters ACQUITY Premier BEH C18 Column, 1.7 μm, 2.1 x 50 mm, MVK
The ACQUITY Premier BEH C18 columns are designed for high-performance liquid chromatography and are a universal choice for method development. This method validation kit (MVK) includes three columns, each from a different material lot. MaxPeak High Performance Surface technology minimizes unwanted analyte/surface interactions, enhancing peak shape and signal intensity. The trifunctionally bonded BEH particle enables a wide usable pH range of 1 to 12.
- Method validation kit (MVK) includes three columns, each from a different material lot.
- Universal column choice for high performance separations.
- MaxPeak High Performance Surface hardware technology reduces unwanted analyte/surface interactions.
- Trifunctionally bonded BEH particle provides a wide usable pH range (pH 1 to 12).
Waters Corp Waters Column, C18, 1.7 μm, 2.1 mm ID, 100 mm Length
ACQUITY Premier CSH C18 Columns address peak shape asymmetry and poor loading capacity for basic compounds in low ionic strength mobile phase. Surface charge facilitates fast column equilibration with low and high pH mobile phases. MaxPeak High Performance Surface hardware technology reduces unwanted analyte/surface interactions, preventing poor peak shape and signal intensity losses. VanGuard FIT Column design protects from contaminants and extends lifetime.
- Addresses peak shape asymmetry and poor loading capacity for basic compounds.
- Facilitates fast column equilibration across pH ranges.
- MaxPeak High Performance Surface reduces analyte/surface interactions.
- VanGuard FIT Column design protects from contaminants and prolongs lifetime.
- Highly efficient, offering wide selectivity and sensitivity.
Waters Corp Waters OBD Prep Column, BEH C18, 5 μm, 10 mm X 250 mm
The XBridge BEH C18 sorbent is a workhorse for HPLC method development, usable across a mobile phase pH range of 1–12. Its trifunctionally bonded C18 ligand provides a universal column for most HPLC separations, offering superior low pH stability and ultra-low column bleed. This column facilitates lab-scale separations for increased throughput.
- Exceptional resistance to mechanical chromatographic bed failure.
- OBD design resists poor solubility and pressure shocks.
- Ensures predictable, uniform density profiles and eliminates voids.
- Delivers consistent column-to-column performance, extending lifetimes and reducing costs.
- Enables direct scaling from UPLC or HPLC screening to lab-scale purification.
- Offers higher recoveries while maximizing productivity.
Waters Corp Waters nanoEase M/Z Protein BEH C4 Column, 300Å, 1.7 μm, 75 μm X 100 mm
Waters nanoEase M/Z Protein BEH C4 Column, 300Å, 1.7 μm, 75 μm X 100 mm
Waters Corp ACQUITY UPLC M-Class Peptide BEH C18 Column, 130Å, 1.7 µm, 100 µm X 100 mm, 1/pk;
ACQUITY UPLC M-Class Peptide BEH C18 Column, 130Å, 1.7 µm, 100 µm X 100 mm, 1/pk;
Chiral Technologies, Inc. CHIRALPAK IK-3 Chiral HPLC Column, 150 mm Length, 4.6 mm Inner Diameter, 3 µm Particle Size
The CHIRALPAK IK-3 is a highly versatile analytical chiral HPLC column designed for efficient enantiomer resolution. With a unique immobilized polysaccharide stationary phase, it offers excellent robustness and compatibility with various solvents, making it suitable for normal phase, reversed-phase, and supercritical fluid chromatography applications. Its exceptional durability and selectivity set it apart, ensuring reliable performance across a wide range of organic solvents.
eMolecules 1371591-51-3 | Medchem Express | Firuglipel | 5mg | 662696341 | HY-109032 | 467.497 | C25H26FN3O5
Ambeed | 23-Dimethyl-4-fluoronitrobenzene | 1g | 525001913 | A110781 | 1736-87-4 | MFCD05663712 | 169.155 | C8H8FNO2
If you are unable to find the chemical you are looking for, make sure you are logged into your fishersci.com account and click on the following link:
eMolecules Building Block Tool
Waters Corporation XSelect CSH C18 XP Column, 2.5 μm, 130 Å, 2.1 x 30 mm
These general-purpose C18 columns use Charged Surface Hybrid (CSH) technology for superior peak shape and increased loading capacity of basic compounds. Packed in ultra-low dispersion hardware, 2.5 μm XP columns provide exceptional separation, robustness, and throughput for HPLC assays. Compatible with HPLC, UPLC, and UHPLC, they optimize total cycle time and improve analysis productivity.
- Offers alternative selectivity.
- Charged Surface Hybrid (CSH) technology for superior peak shape and increased loading capacity.
- Ultra-low dispersion hardware.
- 2.5 μm XP columns deliver exceptional separation and throughput.
- Seamless transition to UPLC.
- Optimizes total cycle time without compromising resolution.
- Compatible with HPLC, UPLC, and UHPLC.
- Improves HPLC analysis productivity by up to 4 times.
- 2.1 mm I.D variants withstand pressures up to 18,000 psi.
Waters Corp XSelect Column, HSS T3, 3.5 μm, 2.1 x 50 mm, 100 Å
This column utilizes a trifunctional alkyl C18 bonded phase, compatible with 100% aqueous mobile phase and offering ultra-low MS bleed. It promotes superior retention of polar compounds and is fully scalable and transferable to UPLC separations.
- High-throughput and high-efficiency separations for polar compounds
- Enhanced selectivity for polar analytes via T3 end-capping
- Lower backpressure enables faster flow rates and higher efficiency
- Compatible with UPLC systems
- Versatile mobile phase compatibility
- pH range: 2 to 8 pH
- Temperature limit: 45 °C
- Maximum pressure: 6000 psi (415 Bar)
- T3 bonding technology
- Particle size: 3.5 μm
- Pore size: 100 Å
- Inner diameter: 2.1 mm
- Length: 50 mm
Waters Corp WATERS CORPORATION XBridge BEH C18 Column, 2.5 μm, 2.1 mm, 75 mm, 130 Å
The XBridge BEH C18 column is designed for HPLC method development, offering a broad mobile phase pH range and superior stability. Its advanced particle technology ensures exceptional separation performance and robustness, facilitating seamless transitions between HPLC and UPLC applications.
- Operates across a mobile phase pH range of 1 to 12.
- Trifunctionally bonded C18 ligand for universal HPLC separations.
- Offers wide usable pH range, superior low pH stability, and ultra-low column bleed.
- Packed in ultra-low dispersion hardware.
- 2.5 μm eXtended Performance [XP] columns for exceptional separation performance and throughput.
- Enables seamless transition toward UPLC adoption.
- Robust under high pH conditions due to BEH particle synthesis and improved bonding.
Waters Corp Waters, XBridge BEH Phenyl XP Column, 130 Å, 2.5 μm, 3 mm X 100 mm, 3/pk
XBridge BEH Phenyl columns provide complementary selectivity to C18 stationary phases, especially for polyaromatic compounds. Featuring the most chemically stable Phenyl sorbent, they offer ultra-low column bleed, extended lifetimes, and excellent peak shape. Packed in ultra-low dispersion hardware, 2.5 μm eXtended Performance (XP) columns deliver exceptional separation, robustness, and throughput for HPLC assays, facilitating UPLC adoption.
- Phenyl chemistry and reversed phase separation mode.
- Hybrid particle substrate, spherical shape.
- pH range of 1 to 12.
- Maximum pressure of 18000 psi (1240 bar).
- Endcapped with phenyl-hexyl bonding technology, low silanol activity.
- Pore size: 130 Å; dimensions: 3 mm × 100 mm.
- 15% carbon load.
- eCord enabled, 3 units per package.
Waters Corp Waters Column, Phenyl-Hexyl, 130Å, 2.5 μm, 3 mm X 50 mm
XSelect CSH Phenyl-Hexyl columns offer an alternative analyte selectivity compared to traditional reversed-phase columns, making them a valuable tool for method development. The trifunctionally bonded C6 phenyl-ligand is a robust, low bleed sorbent that selectively retains polyaromatic compounds through pi-pi interactions. These columns are packed in ultra-low dispersion hardware.
- Offers alternative analyte selectivity compared to traditional reversed-phase columns
- Trifunctionally bonded C6 phenyl-ligand provides a robust, low bleed sorbent
- Selectively retains polyaromatic compounds through pi-pi interactions
- Packed in ultra-low dispersion hardware
- 2.5 μm particles enable exceptional separation performance
- Provides robustness and throughput for HPLC assays
- Offers a seamless transition path towards UPLC adoption
- All column documents are available digitally
Waters Corp Waters XSelect HSS T3 Column, 100Å, 2.5 μm, 2.1 mm X 50 mm
The XSelect HSS T3 XP Column is a low-coverage C18 phase compatible with 100% aqueous mobile phase, ideal for separating polar and non-polar compounds. It offers ultra-low MS bleed and scalability to UPLC. Packed in ultra-low dispersion hardware, the 2.5 μm eXtended Performance [XP] columns provide exceptional separation performance, robustness, and throughput for HPLC assays, with a seamless transition to UPLC.
- Low-coverage C18 phase compatible with 100% aqueous mobile phase
- Separates polar and non-polar compounds; ultra-low MS bleed
- Scalable and transferable to UPLC; exceptional HPLC performance and robustness
- Increased retention for polar compounds; widest retention for mixed analytes; enhanced selectivity
- Manufactured to cGMP, ISO 9001 standards; individually tested for quality